SecondChance
Posted : 7/18/2009 8:49:34 PM
if it is just the 4X8 sheet type of paneling, you can just drywall over it.
mark the wall studs on the ceiling with pencil, then use a plumb bob to
use as a guide to putting the screws in the drywall.
if you never mudded drywall. use a few light coats instead of thick coats
will save your arms sanding the joints. And keep using wider troughs
as you fill in the joints. I saw one guy us a 3ft. piece of metal stud to
do the joints on a ceilling. They use flat paint on ceilings for a reason. LOL