Quick Post

Fencing Type

New Topic
Fencing Type
  • I have a 5 acre former orange grove in central, Fl. It was originally fenced with barbed wire. It has been used in the past for horse pasture.

    I would like to install some type of electrical fence inside of the present barbed wire so this pasture could be rented and the barbed wire fence would not be an issue.

    I need the least expensive and least labor intense fence. Any suggestions as to what to use and how, would be appreciated.

  • So you're keeping the barbed wire and adding some electrical to keep the horses off of it? The cheapest easiest would be electric rope or tape, imo. You have to be sure to keep weeds off of it, though or it will ground out. I had solar and that worked pretty well.

    You will probably use existing poles but you can actually space this stuff out on poles nearly 35' apart. No corner bracing needed (but I used posts on the corners and t-posts down the line)

  • I was under the impresion you had to be a certain distance 1-2 ft away from the barbed wire.

  • I can understand not wanting barbed wire around horses. It's sort of an accident waiting to happen. I had smooth wire which is bad, too. I put electric at the top. Once they get zapped they'll stay away from it. You can use the same posts. If a horse is going to run through a fence, being off it a couple feet  probably won't stop them. Just my opinion.

  • Oh, you can get some insulators that stand off the post about 6 inches or so...

  • The person interested  wants the  the electric fence to be 2 - 2 1/2 ft inside of the barbed wire.  Top strand equal or slightly above barbed wire and a second strand 1/2 way  to ground.  So I may end up installing corner posts and some T Rail.  I was thinking on using the bare wire not poly and tying flagging on it.

  • Instead of any electric fence is it acceptable to run 2 strands of barb less wire 1 at the top and the other half way to the ground?